Adam Hall GmbH
| Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 |
adamhall
.com
3
1
2
8
9
USER´S MANUAL
SUPER CLAMP 710 BMK2 SET 1
UNIVERSAL HOOK CLAMP WITH CLAMPING LEVER
BLACK AND WITH BOLT SS018
SAFTY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the
equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure
and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging,
please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your
local distributor.
11. Check load capacity of tube prior to the fixing.
12. Do not use when defective
IMPORTANT:
Before installation, check that all installation kit components are complete, undamaged and
work correctly (e.g. bolts, nuts, locking pins, threads in speakers, etc.). Should any installation kit
component be damaged, missing or not function properly, the installation kit should not be used.
Pay attention to the maximum load of all components. During installation, attach a suitable
secondary safety component if necessary.
Overhead mounting requires extensive experience, including the calculation of the load limit
values of the installation material and regular safety inspection of all installation materials and
devices, such as lights and speakers. If you do not have these qualifications, do not attempt to
perform an installation yourself. Refer instead to a qualified professional.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adam-
hall.com/media/pdf/MANUFACTURERS-DECLARATIONS_ADAM_HALL.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1,
61267 Neu Anspach / Email [email protected] / 49 (0) 6081 / 9419-0
1
Adjustable clamping lever for attaching the universal clamp.
2
M6 T-screw for securing the mounting pin.
3
Mounting pin with M10 thread and M10 wing nut.
4
Flange for mounting bolt.
5
Spring-loaded locking pin.
6
M5 thread
7
M6 thread
8
Clamp opening (adjustable from 13 to 55 mm).
9
Plastic adapter for mounting on a square tube. Insert the wedge-shaped adapter into
the 90° angled recess of the upper clamp jaw.
FEATURES
• Perfect for lighting and multimedia applications
• Adjustable clamping lever – can be operated in any position
• Full metal (stainless steel and die-cast aluminum alloy)
• For mounting on round and square tubes as well as on flat objects
• Clamping range: 13 – 55 mm
• 5/8” (16 mm) hexagonal or circular pin insert
• 1 x M6 and 2 x M5 thread
• TÜV certified
• Max. load capacity: 20 kg
• Not oxidising
• Various mounting bolts available as an option
• 16 mm M10 bolt for SCP710BMK2
DESCRIPTION
When faced with challenges like mounting your camera at the proper angle, hanging molton
and backdrops, or mounting lighting equipment on a truss, you need just the right tool –
and one that is totally reliable.
Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician
attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.
As well as having an impressive load capacity, the rugged Super Clamp can be used in
practically any situation and on any surface – curved or flat. Your new clamping companion
can support up to 20 kg and enjoys German TÜV certification.
See for yourself how quick and easy it is to mount your equipment securely using the Super
Clamp.
MOUNTING
• Attach a device suitable for traverse mounting to the mounting pin (No. 3) with the M10 wing nut.
• Mount the universal clamp on a traverse or stand in a suitable position using the adjustable
clamp lever (No.1) and ensure a firm grip.
• Loosen the locking screw (No.2) so far that the flange (No.4) on the underside of the clamp can
accept the mounting pin (No.3) (do not remove the bolt).
• Push the spring-loaded locking pin (No.5) on the side of the clamp into the housing so that the
flange (No.4) on the underside of the clamp can accept the mounting pin and push
the pin all the way into the flange.
• Release the pressure from the locking pin and keep hold of the device being mounted until you
are certain that the mounting pin is fully engaged.
• Rotate the device to achieve the desired dispersion and secure the connection by tightening
the lockin screw (No. 7).
When mounting devices to traverses and stands, pay attention to the information in the safety
instructions in this manual, and in particular the information under ‘
Important
’.
INTRODUCTION
The SCP710BMK2SET1 mounting kit comprises the universal clamp SCP710BMK2 and
the mounting pin SS018, and is suitable for secure mounting of lights, speakers and other
devices to traverses and tripods.
PART DESCRIPTION
Model name:
SCP710BMK2SET1
Product type:
Truss Accessories
Components:
Universal clamp SCP710BMK2 mounting pin SS018
Weight:
0.544 kg
Universal clamp SCP710BMK2
Type:
Universal clamp
Material:
Die-cast aluminum
Finish:
Powder coated
Color:
Black
Suitable for tubing
diameter:
13-55 mm
Flange:
For mounting pin SS017 or SS018
Weight:
0.48 kg
Safe working load
(SWL):
20 kg
Additional features:
TÜV-certified
Mounting pin SS018
Type:
Mounting pin for universal clamp
Material:
Brass
Finish:
Unfinished
Thread:
M10 x 16
Weight:
0.064 kg
Additional features:
M10 wing nut included
SPECIFICATIONS
1
2
8
2
5
6
4
7
