background image

Adam Hall GmbH

 | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany

Phone: +49 6081 9419-0 | 

adamhall

.com  

87472

19" 2U MAINS POWER STRIP WITH 9 SOCKETS

Product number

87472

Product type

19" rack mains socket strips

Type

19" / 2 U

Number of outlets (Earth-

ing contact / IEC 7/4)

9, Rotated 45°

Power input

Cables

Cable length

3 m

Cable connector

Earthing contact Type F (CEE 7/4)

Cross section

1.5 mm²

Operating voltage

250 V

Max. current

16 A

Cabinet material

Steel

Color

Black

Width

483 mm

Height

90 mm

Depth

88 mm

Weight

2.15 kg

FEATURES

• Rated @ 250 V, 16 A
• On the front, 3 practical outlets with hinged lids
• On the rear, 6 diagonally arranged earthed sockets for easy insertion of power 

  supplies, angle plugs, etc. with independent twin-pole power switches for switching 

  the front and rear sides separately; it allows for independent switching of the devices
• Robust powder coated steel housing
• Installation depth 75mm

SPECIFICATION

SAFETY INFORMATION

1.  Please read these instructions carefully. 

2.  Keep all information and instructions in a safe place. 

3.  Follow the instructions. 

4.  Observe all safety warnings. Never remove safety warnings or other information from the 

equipment. 

5.  Use the equipment only in the intended manner and for the intended purpose. 

6.  Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). 

Make certain that wall mounts are properly installed and secured. Make certain that the 

equipment is installed securely and cannot fall down. 

7.  During installation, observe the applicable safety regulations for your country. 

8.  Never install and operate the equipment near radiators, heat registers, ovens or other sourc-

es of heat. Make certain that the equipment is always installed so that is cooled sufficiently 

and cannot overheat. 

9.  Never place sources of ignition, e.g., burning candles, on the equipment. 

10.  Ventilation slits must not be blocked. 

11.  Do not use this equipment in the immediate vicinity of water (does not apply to special out-

door equipment - in this case, observe the special instructions noted below. Do not expose 

this equipment to flammable materials, fluids or gases. 

12.  Make certain that dripping or splashed water cannot enter the equipment. Do not place con-

tainers filled with liquids, such as vases or drinking vessels, on the equipment. 

13.  Make certain that objects cannot fall into the device. 

14.  Use this equipment only with the accessories recommended and intended by the manufac-

turer. 

15.  Do not open or modify this equipment. 

16.  After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., 

due to tripping hazards. 

17.  During transport, make certain that the equipment cannot fall down and possibly cause prop-

erty damage and personal injuries.

18.  If your equipment is no longer functioning properly, if fluids or objects have gotten inside the 

equipment or if it has been damaged in another way, switch it off immediately and unplug 

it from the mains outlet (if it is a powered device). This equipment may only be repaired by 

authorized, qualified personnel. 

19.  Clean the equipment using a dry cloth. 

20.  Comply with all applicable disposal laws in your country. During disposal of packaging, please 

separate plastic and paper/cardboard. 

21.  Plastic bags must be kept out of reach of children.

FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:

22.  If the equipment has been exposed to strong fluctuations in temperature (for example, after 

transport), do not switch it on immediately. Moisture and condensation could damage the 

equipment. Do not switch on the equipment until it has reached room temperature. 

23.  Before connecting the equipment to the power outlet, first verify that the mains voltage and 

frequency match the values specified on the equipment. If the equipment has a voltage selec-

tion switch, connect the equipment to the power outlet only if the equipment values and the 

mains power values match. If the included power cord or power adapter does not fit in your 

wall outlet, contact your electrician. 

24.  Do not step on the power cord. Make certain that the power cable does not become kinked, 

especially at the mains outlet and/or power adapter and the equipment connector. 

25.  When connecting the equipment, make certain that the power cord or power adapter is al-

ways freely accessible. Always disconnect the equipment from the power supply if the equip-

ment is not in use or if you want to clean the equipment. Always unplug the power cord and 

power adapter from the power outlet at the plug or adapter and not by pulling on the cord. 

Never touch the power cord and power adapter with wet hands. 

26.  Whenever possible, avoid switching the equipment on and off in quick succession because 

otherwise this can shorten the useful life of the equipment.

27.  To disconnect the equipment from the power mains completely, unplug the power cord or 

power adapter from the power outlet. 

28.  Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning 

strike or before extended periods of disuse.

CAUTION: 

 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Never remove the cover, because otherwise there may be a risk of electric shock. There are no 

user serviceable parts inside. Have repairs carried out only by qualified service personnel. 

The lightning flash with arrowhead symbol within an equilateral triangle is intended to 

alert the user to the presence of uninsulated “dangerous voltage” within the product’s 

enclosure that may be of sufficient magnitude to constitute a risk of electrical shock. 

The exclamation mark within an equilateral triangle is intended to alert the user to the 

presence of important operating and maintenance instructions.

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY 

You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adam-

hall.com/media/pdf/MANUFACTURERS-DECLARATIONS_ADAM_HALL.pdf

To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1, 

61267 Neu Anspach / Email [email protected] / 49 (0) 6081 / 9419-0

         PROPER DISPOSAL OF THIS PRODUCT 

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT) 

(Valid in the European Union and other European countries with waste separation) 

This symbol on the product, or the documents accompanying the product, indicates that this ap-

pliance may not be treated as household waste. This is to avoid environmental damage or person-

al injury due to uncontrolled waste disposal. Please dispose of this product separately from other 

waste and have it recycled to promote sustainable economic activity.

Отзывы: