© Adam Equipment Company 2007
15
6.2.7
F7
-RE-ZERO RANGE
To enter this parameter, press the
[Tare]
key when “
F7
” is shown.
The display will show the current re-zero range.
Press the
[Print]
key to change the value and press
[Tare]
to accept the value.
NOTE:
Only 2% is allowed for the AZ
extra
scales.
6.2.8
F8
-SUCCESSIVE TARE
To enter this parameter, press the
[Tare]
key when “
F8
” is shown.
The display will show if the successive tare is on or off.
Press the
[Print]
key to change the value.
Press
[Tare]
to accept the displayed value.
NOTE:
Either option is allowed for the AZ
extra
scales.
6.2.9
F9
-A/D COUNT
To enter this parameter, press the
[Tare]
key when “
F9
” is shown.
This parameter allows you to view the A/D counts from the internal A/D converter. This can
be an aid to service.
Press the
[Tare]
key to return to the PARAMETER menu.
Press the
[Zero]
key to return to weighing.
Содержание AZextra 15
