ADA INSTRUMENTS IronWeld 160, Руководство по эксплуатации

Страница: 5 / 36

MEASUREMENT FOUNDATION
5
Iron Weld 160/180/200/220
- It’s forbidden to touch electrode with bare hands. It’s forbidden to wear wet or damaged gloves or protec
-
tive clothes.
- Don’t touch the parts under voltage.
- It’s forbidden to touch electrode that is in contact with welding surface, ground or other electrode which is
connected to another welder.
- Never weld tanks that contain lammable and explosive materials.
- To avoid accidents when working at height, follow safety regulations.
- Be careful, there must be no bystanders on the working site.
- Welders radiate electromagnetic waves and make noises. So be sure that there are no people with cardiac
stimulator or other equipment that can be inluenced with electromagnetic waves and radio frequencies.
- Before operation check the connection of cables and earth. From time to time check the condition of weld
-
ing cable. If you use this instrument regularly, check it once per month.
- Only qualiied specialists can do servicing.
- If you don’t use welder for a long time, store it in place wih good ventilation.
- Regularly clean welder from dust. Check holding elements. They must be tighten. Check ectromagnetic
system, current adjusting knob and so on.
- Dust in the air and also corrosive substances mustn’t exceed permissible levels.
- It’s necessary to provide access for air for the welder. There must be free space around welder, about 50
cm.
- Ensure that there are no metallic or foreign objects near the welder. They can get into the welder.
- Take out the electrode if you don’t use welder for a long time.
- Don’t place the welder on the vibrating surface.
- Ensure that there are no noises in the place of adjustment of welder.