7 of 10
2000 American Honda Motor Co., Inc. – All Rights Reserved
BII 22288 (0010)
28. Secure the security system wire harness to the
vehicle harness using one short wire tie in the
area shown.
SHORT WIRE TIE
VEHICLE
HARNESS
ENGINE HOOD
OPENER
SECURITY
SYSTEM WIRE
HARNESS
29. Locate the 14-pin connector blue-taped to the
vehicle harness above the fuse box. Remove the
blue tape to free connector. Route the 14-pin
connector of the security system wire harness up,
and connect it to the 14-pin connector you just
freed.
LONG WIRE
TIES
VEHICLE
4-PIN
CONNECTOR
SECURITY
SYSTEM WIRE
HARNESS
VEHICLE’S 14-PIN
CONNECTOR
SHORT WIRE
TIES
4-PIN
RELAY
BLUE TAPE
FUSE BOX
FUSE LABELS
(3A)
30. Connect the 4-pin relay to the vehicle’s 4-pin
connector, and secure the 4-pin relay to the
14-pin connectors using the long wire tie as
shown.
31. Secure the security system wire harness to the
vehicle harness with one short wire tie as shown.
Do not secure it to the SRS yellow wire harnesses
with the wire tie as shown.
32. Attach the fuse labels from the kit to the fuse
cases on the security system wire harness.
33. Locate the 2-pin connector blue-taped to the
vehicle harness behind the steering wheel,
remove the blue tape to free the connector. Plug
the 2-pin connector from the LED on the upper
steering column cover into the 2-pin connector.
SCREWS
LOWER
STEERING
COLUMN
COVER
UPPER STEERING
COLUMN COVER
SHORT
WIRE TIE
2-PIN
CONNECTORS
LED
LED HARNESS
BLUE
TAPE
34. Secure the LED harness to the vehicle harness
with one short wire tie as shown; then reinstall the
upper and lower steering covers.