158 |
| 159
HANDLING THE UNEXPECTED
HANDLING THE UNEXPECTED
n
Getting Ready to Repair the Tire
1. Open the hatch.
2. Loosen the tool box tie-downs and remove the tool box
lid.
3. Take the kit out of the tool box.
4. Place the kit face up on flat ground near the punctured
tire and away from traffic. Do not place the kit on its side.
Follow the instructions in the kit to repair the tire.
Lid
Tie Down
Tire Repair Kit
Do not use an unapproved puncture-repairing agent other than the one provided in the kit
that came with your vehicle. If a different agent is used, you may permanently damage the
tire pressure sensor.
NOTICE
Fuse Locations
If any electrical devices are not working, set the power mode to VEHICLE OFF and check to see if
any applicable fuse is blown. Fuse locations are shown on the fuse box cover. Locate the fuse by
the fuse number and box cover number.
n
Hood Fuse Box A
Located near the radiator. Push the tabs to open the box.
Fuses shown on next page.
Содержание NSX 2018
Страница 1: ...2018 OWNER S GUIDE...