Acuity Brands NLIGHT nDTC, Руководство пользователя

Страница: 19 / 35

Acuity Brands | One Lithonia Way Conyers, GA 30012 | Phone: 800.535.2465 | www.nlightcontrols.com | © 2020 Acuity Brands Lighting, Inc. | All rights reserved. | Rev. 09/17/2020
Screen introduces ability to enable, or disable, sensors
from adjusting lights during execution of the schedule.
• Available options:
o No Change – Maintains current sensor
state
o Disable – Disables sensor from performing
local broadcast
o Enable – Enables sensor to perform local
broadcast
Configuring an End Trigger
End Triggers are the actions that run when a schedule is coming to close. Through the End Trigger, users specify the end
time of the schedule as well as the action that the schedule will be driving across the devices connected to the nDTC’s
network.
Configuration of End Triggers are not required, however, if not programmed will be automatically be set to “Do
Nothing” at 11:59 PM.