EF300 Electrofusion Welder Manual
Version 1.1
Page
1
of
5
Acu-Tech EF300 Electrofusion Welder Manual
EF300 & EF300GPS
New technology has led to the development of a generation of HDPE welding products that boasts an array
of unique and revolutionary features. The EF300 Pressure Welder has been designed and built by a
reputable company in Germany, with the low weight and compact dimensions not compromising the top-
notch performance ability and unconditional reliability.
Contents:
1.
Introduction
2.
Safety Messages
3.
Operation
4.
Error Codes
5.
Technical Specifications
6.
Service & Repair
1. Introduction
This product is designed exclusively for jointing PE discharge lines assembled with electrofusion fittings.
This product has been checked for operational, reliability and safety features are functioning correctly. In
the event of errors of handling or misuse, however, the following may be exposed to hazards:
▪
T
he operator’s health,
▪
The product and other hardware of the operator,
▪
The efficient work of the product.
All persons involved in the installation, operation, maintenance, and service of the product must:
▪
Be properly qualified,
▪
Be able to operate the product only when observed,
▪
Read
carefully and conform to the User’s Manual before working with the produc
t.