ACTiSYS Confidential!
Corp.
48511 Warm Springs Blvd., Suite 206, Fremont, CA 9453, USA Tel: (510)490-8024,
Fax: (510)623-7268, Website: www.actisys.com, E-mail: [email protected]
IrDA OBEX Server and Client Protocol Debug and
Test Suite, ACT-IR9007
© Copyright ACTiSYS Corporation 2005-2006
•
Facilitates testing and debugging of IrDA OBEX Server and Client.
•
Supports both IrDA™ Primary and Secondary devices.
•
Supports IrDA FIR (4Mbps), MIR (0.576 &1.152Mbps) and SIR (9.6-115.2Kbps) data rates.
•
ACT-IR9007 Test Suite is implemented with all Test cases as per IrDA OBEX Test Spec.v1.0.
•
Test software and Debugger intelligence are easily upgradeable and expandable.
•
Friendly and comprehensive multi-window GUI for easy viewing and operation.
•
Detailed information regarding test progress, test results and violations are
displayed in different color, in separate windows, for each Test Case.
•
Debugger module describes the reason for Test Failure in every Test Case.
•
User can customize Test Cases based on their IrDA OBEX Server/Client device features.
•
User can run IR9007SW easily without knowing IrDA OBEX Protocol Test Specification in detail.
•
Automatically generates official IrDA OBEX Protocol Test Report as per approved Test Report
Templates.
•
Speeds up the IrDA® OBEX Qualification of your IrDA products.
•
You may buy one model, and easily upgrade to other Debug and Test Suite models:
ACT-IR9005SW (IrSimple Primary and Secondary Protocol Debug and Test Suite)
ACT-IR9006SW (IrDA Primary and Secondary Protocol Debug and Test Suite)
ACT-IR9008SW (IrFM PTD and POS Protocol Debug and Test Suite)
ACT-IR3200SW (IrDA BER, Bit Error Rate, Hand Held Tester)
