The Wireless Connectivity Expert
ACT-BT5701S v2
User’s Manual
9. CONFIGURATION PARAMETERS
Figure 4: Configuration Parameters Window
9.1. UART
Format
•
Baud Rate:
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800,
921600 or 1843200 bps selectable.
•
Data Bit:
5, 6, 7 and 8 data bits supported
•
Parity Check:
None, Odd or Even.
•
Stop Bit:
1 or 2 stop bits.
•
RTS/CTS Flow Control:
None, or Enable
9.2. COM
Port
Select COM1, COM2 or any other COM port you have connected.
9.3. Bluetooth
Configuration
•
Bluetooth Address:
BD address is an unique 6 byte hexadecimal device identifier, where the
first 3 bytes of the address are assigned by IEEE, and the last 3 bytes are freely allocated by
the manufacturer. And the format is as (00: 0B: 00: 00: 00: 02).
•
Device Name:
Give any name you want to show. Maximum is 24 characters allowed.
•
Password:
It’s PIN code. Default is 000. You can leave it blank. Maximum length is 8 digits
Copyright 2005-2006 ACTiSYS Corp. Page
8
of
18
ACTiSYS Confidential Information
Dec 06, 2006
Version 2.0
