The Wireless Connectivity Expert
ACT-BT5701S v2
User’s Manual
13.2 Generic Specifications
FUNCTION ACT-BT5701S
v2
Standard Bluetooth
1.2
Interface RS232
Configurable Parameters
Master or Slave mode, Stop Bit, Parity Check, Baud Rate,
Flow Control, BD address & all other parameters shown in
Chapter 9
Modulation GFSK
Spread Spectrum
Frequency Hopping Spread Spectrum (FHSS)
Dimension
(78.6 X 41.2 X 32.8) mm / 32grams
14. FREQUENTLY ASKED QUESTIONS (FAQ)
Q1
. What is the Bluetooth version of the device?
A1.
This device supports Bluetooth 1.2 version.
Q2.
How to change UART settings?
A2.
Use the ACT-BT5701Sv2.EXE. Refer to Chapter 9 & 10 for Configuration Parameters and
Procedures.
Q3.
What is the data format of the device?
A3.
Refer to Section 9.1 of Chapter 9.
Q4.
How to display device settings?
A4.
Use the ACT-BT5701Sv2.EXE. Refer to Chapter 10 “Procedure for Configuration Parameters”.
Q5.
How to set baud rate and what baud rates it supports?
A5.
Use the ACT-BT5701Sv2.EXE. Refer to Chapter 9 & 10 for Configuration Parameters &
Procedure. It supports1200 bps to 1843200 bps baud rate.
Q6.
How to set PIN key (password)?
A6.
Use the utility ACT-BT5701Sv2.EXE. The default PIN key is “0000”. But you can change it. Refer
to Chapter 9 & 10.
Q7.
How to change device name?
A7.
Use the utility file ACT-BT5701Sv2.EXE. Refer to Chapter 9 & 10.
Q8.
How to provide power to ACT-BT5701S v2?
Copyright 2005-2006 ACTiSYS Corp. Page
16
of
18
ACTiSYS Confidential Information
Dec 06, 2006
Version 2.0
