background image

Technical Accuracy

To the best of our knowledge the information contained in this document was 

correct at the time it was produced. Active Research Ltd cannot accept liability 

for any inaccuracies or omissions.  

The products described in this manual and the specifications thereof may be 

changed without prior notice. Active Research Ltd cannot accept any liability 

for differences between the product and this document. To check for updated 

information and specifications please check actisense.com. 

Active Research Ltd will not be liable for infringement of copyright, industrial 

property rights, or other rights of a third party caused by the use of information 

or drawings described in this manual.

Product Guarantee

This product comes with a three year ‘return to base’ guarantee. If you suspect 

that the unit is faulty please refer to the Troubleshooting Section of the User 

Manual before contacting support.   

It is a requirement of the guarantee that all installations of electronic equipment 

follow  the  NMEA  0400  specification.  Any  connection  to  a  battery  or  power 

supply must meet the mandatory essential safety requirements that may be 

imposed by local regulatory agencies.

Actisense products are intended for use in a marine environment, primarily for 

below deck use. If a product is to be used in a more severe environment, such 

use may be considered misuse under the Active Research Ltd guarantee. 

Important Notices

The device to which this manual relates complies with the Electromagnetic 

Compatibility requirements according to EN60945. The unit should always be 

used in conjunction with appropriately approved, shielded cable and connectors 

as per NMEA 0400 to ensure compliance. A declaration of conformity is 

available for download at www.actisense.com.

If the device to which this manual relates is to be installed within five metres of a 

compass, please refer to the ‘Compass Safe Distance’ section in the ‘Technical 

Specifications’ table.

Trademarks and Registered Trademarks

Actisense® and the Actisense logo are registered trademarks of Active 

Research Limited (Ltd). All other trademarks are the property of their respective 

owners.

The NMEA® name and NMEA logo are copyright held by the NMEA. All uses in 

this manual are by permission and no claim on the right to the NMEA name or 

logo are made in this manual.

Fair Use Statement

The contents of this manual may not be transferred or copied without the 

express written permission of Active Research Ltd.

Copyright © 2017 Active Research Ltd. All rights reserved.

NMEA Buffer

Quick Start Guide

NBF-3

Product Registration

Please register your product via the online form at http://actisense.com/

support/prodreg.html.  

Your product package includes a unit serial number. The serial number is six 

digits long and can be found below the barcode on the label. Your registration 

will assist Actisense Support to link your product to your details, simplifying any 

future assistance you may require.

Product Disposal

Please dispose of this product in accordance with the WEEE Directive.  

The product should be taken to a registered establishment for the disposal of 

electronic equipment.

Issue 1.1

Before getting started

The wire colours used in this quick start guide are in accordance with 

the  NMEA  0183  specification  (v.4.10,  June  2014)  and  are  for  illustration 

purposes only. Please ensure you check the wiring colours in the installation 

instructions for the device you wish to interface to the NBF-3.

Introduction & Features

Ground breaking and innovative ‘ISO-Drive™’ technology from Actisense 

protects up to six NMEA 0183 Listeners from damage that can be caused by 

hazardous ground loops. Electrical isolation on the NBF-3 input also provides 

protection to the connected Talker.

Data is distributed identically from each of the six outputs and at least the 

original signal voltage levels. This means that information sent by the connected 

Talker is reliably delivered to its intended destination, even over long cable runs. 

The addition of power distribution for the NMEA Talker allows a single cable to 

connect power and data to the Talker.

®

Active Resear

ch Ltd 

21 Harwell Road

 

Poole

 

Dorset 

UK, BH17 0GE

Tel: +44 (0)1202 746682

 

Email:

[email protected]

 

Web: 

www.actisense.com

Отзывы: