![ActionTec Verizon GT784 Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/actiontec/verizon-gt784/verizon-gt784_instructions_2843256001.webp)
Instructions to Connect
your New Gateway Router
The Verizon GT784 gateway/router is
replacing your current 6110 Bridged device.
Please note: This process below should be
followed only if you are attaching another piece
of equipment (router/switch, etc) to this Verizon
Gateway GT784. If your existing set up requires
the Verizon GT784 to be put in bridge mode,
please follow these quick easy steps.
If you configure the Verizon GT784 in bridge mode, this will
disable the wireless functionality.
1
2
3
4
5
6
7
8
9
10
11
The “Login” screen will appear
• Create and enter a new password for the Verizon GT784
• “Re-type the New Password” in the appropriate field
• Make sure to write the password down on a piece of paper
and keep it in a safe place for future reference
• Select your local time zone from the “Time Zone” drop-
down list
• Click Apply
1
2
3
4
5
6
7
8
9
10
11
Advanced Setup
• After the changes are applied, the Verizon GT784 Home
screen will appear.
• Click on the Advanced Setup tab located at the top of the screen
1
2
3
4
5
6
7
8
9
10
11
Advanced Setup Screen will Appear
• Click on “WAN IP Settings” located under “IP Addressing”
Before You Begin
Disconnect your existing Verizon modem/router including all
cables and cords and any other equipment attached to the
Verizon modem/router.
1
2
3
4
5
6
7
8
9
10
11
CoNfIGuRING BRIdGe Mode
Logging in to the Verizon GT784
To access the Verizon GT784, enter the following gateway
address into the browser address line:
http://192.168.1.1
1
2
3
4
5
6
7
8
9
10
11
RouTeR SeTuP
Connecting your new gateway/router
A
Connect Yellow Ethernet cord from Ethernet port on PC
or laptop to any of the 4 Ethernet ports on the back of the
wireless router
B
Connect phone line to phone jack and wireless router
• Do not place a filter on phone line connected to the
router
• Use a 2-for-1 adapter If connecting a phone on the
same jack.
• Make sure to place a filter on the line connected to
the telephone
C
Connect Power supply to router and plug into power outlet
d
Turn router on using the power on/off switch
1
2
3
4
5
6
7
8
9
10
11
A
d
B
C
REPINST6110