background image

 PC-250, PC-260, and PC-300 User’s Guide 

Page 1 

Proprietary Notice and 
Disclaimer 

Unless otherwise noted, this document and the information herein disclosed are 
proprietary to the Manufacturer.  Any person or entity to whom this document is 
furnished or who otherwise has possession thereof, by acceptance agrees that it will not 
be copied or reproduced in whole or in part, or used in any manner except to meet the 
purposes for which it was delivered. 
The information in this document is subject to change without notice, and should not be 
construed as a commitment by The Manufacturer. Although The Manufacturer will make 
every effort to inform users of substantive errors, The Manufacturer disclaims all liability 
for any loss or damage resulting from the use of this document or any hardware or 
software described herein, including without limitation contingent, special, or incidental 
liability. 
TCIC and CardTalk are trademarks of Databook Incorporated. Card Reader is a 
trademark of the Manufacturer . PC and AT are trademarks of IBM Corporation. MS-
DOS, MS-Windows and Flash File System are trademarks of Microsoft Corporation. M-
Systems is a copyright of M-Systems. SunDisk is a trademark of SunDisk. All other 
product names are trademarks or registered trademarks of their respective owners. 

Copyright © 1994 by: 

 

All rights reserved 

 

Life Support System Application 
Disclaimer 

The Manufacturer’s products may not be used as critical components in life support 
devices or systems without the written consent of an officer of the manufacturer. As used 
herein, life support devices or systems are devices or systems which (a) are intended for 
surgical implant in the body, or (b) support or sustain life, and whose failure to perform, 
when properly used in accordance with instructions provided in the labeling, can 
reasonably be expected to result in a significant injury to the user. A critical component 
is any component in a life support device or system whose failure to perform can be 
reasonably expected to cause the failure of the life support device or system or to affect 

its safety or effectiveness

 Software License Agreement 

Read this agreement before opening the software. Once you have removed the software 

from its envelope, you have accepted the agreement

Содержание PC-250






















































































Отзывы: