Issued/Revised: 08/29/13
UP163F RECUMBENT CYCLE (FOOTING)
FitTech
800.458.5872
www.actionfitoutdoors.com
2
ActionFit
UP163I RECUMBENT CYCLE (IN GROUND)
UP163S RECUMBENT CYCLE (SURFACE)
SPECIFICATIONS
BACKREST:
The Backrest shall be constructed from injection molded Nylon W6.
BASE COVER:
The Base Cover shall be constructed from aluminum and powder coated.
BOLT CAP:
The Bolt Cap shall be constructed from aluminum and powder coated.
CRANK ARM:
The Crank Arm shall be constructed from aluminum and chromium coated.
CYCLE COVER:
The Cycle Cover shall be constructed from aluminum and powder coated.
HANDLE GRIP:
The Handle Grip shall be constructed from injection molded PVC.
MAIN PIPE:
The main frame shall be an all welded assembly fabricated from SPP (carbon steel pipe) and dual phase steel plate.
The frame shall be powder coated.
PEDAL:
The Saddle shall be constructed from aluminum and Electro-deposition coated.
POST CAP:
The Post Cap shall be constructed from injection molded Polyethylene.
SADDLE:
The Saddle shall be constructed from injection molded Nylon W6.
HARDWARE:
All nuts, bolts, screws, and lock washers used in the assembly shall be stainless steel, yellow dichromate plated steel,
blue-coat plated steel, mechanically galvanized or powder coated/yellow dichromate plated steel. All primary fasteners
shall be 304 alloy stainless steel. Fasteners with yellow dichromate treatment have an electro-deposited, 99.9% pure
zinc substrate applied from a specially formulated solution sealed with a yellow dichromate top coat designed to work in
conjunction with the zinc plating.
