actiLib Autoloader 1U
– User and Service Guide
Page 12 of 97
5
Product description (overview) and features
The actiLib Autoloader 1U provides a compact, high-capacity, low-cost solution for simple,
unattended data backup. This unique design houses up to 8 tape cartridges in a compact 1U
form factor with easy access to tape cartridges via two removable magazines and a mail slot.
The magazines can hold up to four (left magazine including mail slot) cartridges.
The loader can support one LTO3 or LTO4 half height tape drive. The loader occupies one
SCSI target address and uses dual LUNs for the tape drive and loader robotic.
The loader can operated via Operator Control Panel or Remote management unit.
The actiLib Autoloader 1U is compatible with most operating systems and environments that
support the SCSI interface. However, the loader requires either direct support from the
operating system or a compatible backup application to take full advantage of its many features.
Figure 1 front and rear actiLib Autoloader 1U view
Particular emphasis of the actiLib Autoloader 1U includes:
Platform of 1U tape loaders
-
independent of tape and drive form factors
Configurability
-
from entry level cost optimized loader to a feature rich configuration
Broad level of connectivity
-
SCSI , SAS and FC
Expandability
– magazines and drive sleds can be added in the field
Technology upgrade
-
customer can upgrade tape drive technologies (e.g. LTO3 to
LTO4) in the field
Service friendly design
- drive, accessible from the back of the unit allowing for quick
replacement
Maximum up time
- through advanced error handling and recovery capability
