Hardware Manual
E217
E222
1)
Serial Port
This port connects to serial devices via RS-485 or RS-422 protocols. Use the supplied serial
port terminal block to connect the wires from the serial device to the camera.
How to Connect a Serial Device
on page 32 for
connection details.
2)
Ethernet Port
Connects to a network using an Ethernet cable.
3)
Memory Card Slot
Insert a memory card into this slot for local recording purposes. See
on page 36 for more information.
NOTE:
Supports microSDHC and microSDXC cards.
4)
Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including
administrator
’s password.
The reset button can be used for following purposes:
