Installation Guide
Step 6: Install the Camera
1.
Align the camera screw holes to the screw holes on the gang box converter marked
#2
as
you push the excess length of cable into the gang box.
2.
Attach the three (3) screws with rubber, which are bundled with the gang box converter, to
secure the camera to the converter.
CAUTION:
When using electric screwdrivers,
be careful not to touch the internal
camera components while attaching the screws. Since electric screwdrivers vary in sizes,
speed, and force, they may bruise and damage the internal camera components.
DISCLAIMER:
ACTi will
not be responsible for camera damage caused by improper
installations or the misuse of equipment for installation.
