Acteon ImplantCenter M+, Руководство пользователя, Страница: 25 / 44

8 Cleaning, disinfecting and
sterilising
The instructions relating to cleaning, disinfection and sterilisation protocols for accessories provided by
SATELEC® have been approved for each medical device and accessory. The applicable protocols are listed in
the chapter
Associated documentation page 7 .
They can be downloaded at the following address:
www.satelec.com/documents
In all cases, the local regulations in force relating to the cleaning, disinfection and sterilisation protocols for
accessories take precedence over the information provided by SATELEC®.
Do not use antiseptic products containing flammable substances.
8.1 Cleaning and disinfecting the medical device
The medical device must be OFF (switch on O) during cleaning and disinfecting procedures.
Avoid using cleaning and disinfection products that contain flammable agents. Otherwise, ensure that the
product has completely evaporated or that there is no fuel left on the medical device and its accessories before
switching it on.
Do not use an abrasive product to clean the medical device.
Never apply sprays directly to the medical device to clean it. Always spray the product onto a wipe,
then clean the medical device.
Clean and disinfect the medical device's control unit and footswitch before and after use.
8.2 Cleaning, disinfecting and sterilising accessories
Refer to the cleaning, disinfection and sterilisation protocols for accessories listed in chapter Associated
documentation page 7 .
User Manual • ImplantCenter™ M+ • J27251 • V1 • (13) • 09/2013 • NO25EN010A - Page
23
/
42