Actel Silicon Explorer II Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 42

Actel Silicon Explorer II Скачать руководство пользователя страница 37

General Information

31

General Information

Q: Does Silicon Explorer support ProASIC programming and

debugging?

A: No. As of today Silicon Explorer does not support either ProASIC

programming or debugging.

Q: What are the accessories available for the Silicon Explorer?

A: Silicon Explorer Accessories:

SI-EX-RIBBONS:Ribbon cable assembly for FPGA probe
connection (for both Silicon Explorer and Silicon Explorer lite)

SI-EX-TCA: Flying lead cable assembly

Q: Can we use Silicon Explorer to debug devices which have their

security fuses programmed?

A: As a part of the Actel FPGAs security feature the Silicon Explorer

cannot be used on devices which have their security fuse
programmed.

Q: Can I use the probe pins as regular I/Os?

A: All of the probe pins can be used as user I/O except for the MODE

and TMS pins. Once the device enters probe mode, The I/O's
switch to the probe functionality. We highly recommend that you
do not use these pins as inputs, since your device will not accept
the inputs during probe mode.

Q: What are the differences between Silicon Explorer I and Silicon

Explorer II?

A: The main difference between Silicon Explorer I and Silicon

Explorer II is that the Silicon Explorer II logic-analysis system was
enhanced to support an external power supply, which permits
internal probing of 5.0V, 3.3V, and 2.5V FPGAs. Other features
include four-levels of triggering, decompression on download to
speed up response time and system acquisition rates up to
100MHz.

«
...
35
36
37
38
39
...
»

Содержание Silicon Explorer II











































Отзывы:

Нет отзывов