Actel Silicon Explorer II, Руководство пользователя, Страница: 16 / 42

Chapter 2: Silicon Explorer Software
10
Using the Command Module
The Command module is the interface used to select internal nodes in
the Actel FPGA family. The following sections describe exploring with
the probe.
Figure 2-2. Command Module
Explore the
FPGA
The following procedures describe how to use the Command module
to examine an Actel FPGA.
To open a probe file:
1. Launch Silicon Explorer. Select Silicon Explorer from the
Designer menu under Programs in the Start menu.
2. Select a Probe (.prb) file to open. Select the Open command
from the File menu. Choose (*.prb) as the File type and double-click