Actel ProASIC3/E Скачать руководство пользователя страница 51

Страница: 51 / 106

Step 4 – Perform Post-Synthesis Simulation

ProASIC3/E Starter Kit User’s Guide and Tutorial

Set the following in the dialog box:

Technology

: Actel ProASIC3E (set by Libero IDE)

Part

: A3PE600

Fan-out Guide

: 12 (default)

Hard Limit to Fan-out

: Off (default). This refers to the fan-out limit.

Accept the default values for each of the other tabs in the Options for Implementation dialog box and click

Figure 7-27. Options for Implementation Dialog Box-A3P250

Set the following in the dialog box:

Technology

: Actel ProASIC3 (set by Libero IDE)

Part

: A3P250

Fan-out Guide

: 12 (default)

Hard Limit to Fan-out

: Off (default). This refers to the fan-out limit.

Accept the default values for each of the other tabs in the Options for Implementation dialog box and click

In the Synplify main window, click

Run

. Synplify compiles and synthesizes the design into a netlist called Top.edn.

The resulting Top.edn file is then automatically translated by Libero IDE into a VHDL netlist called Top.vhd.

The resulting EDIF and VHDL files are displayed under Implementation Files in the File Manager.

If any errors appear after you click the

Run

button, edit the file using the Synplify editor. To edit the file, double-

click the file name in the Synplify window. Any changes made here are saved to the original design file in Libero
IDE.

Save and close Synplify. From the

File

menu, click

Exit

to close Synplify. Click

Yes

to save any settings made to the

Top_syn.prj in Synplify.

Step 4 – Perform Post-Synthesis Simulation

The next step is simulating the VHDL netlist of the design using the VHDL testbench created in the section,

“To create

a stimulus file and generate a VHDL testbench:” on page 44

Click the

Simulation

icon in the Libero IDE Design Flow window, or right-click the

Top.vhd

file in the Design

Hierarchy tab and select

Run Post-Synthesis Simulation

. This launches the ModelSim Simulator that compiles the

source file and testbench.

Содержание ProASIC3/E











































































































Результаты поиска

Содержание ProASIC3/E

Отзывы:

Actel ProASIC3/E, Руководство пользователя, Страница: 51 / 106

Результаты поиска

Содержание ProASIC3/E

Отзывы: