Actel Core1553, Руководство пользователя, Страница: 10 / 38

Core1553 Development Kit Hardware
1 0
Core1553 Development Kit
The Core1553 Development Kit includes the Fusion Advanced Development Kit board and the
Core1553 Daughter Card. This section describes the board components briefly. The CD contains the
board schematic and other required files.
Fusion Advanced Development Kit Board Description
The Fusion Advanced Development Kit ( Figure 1-2 ) provides a low-cost board for the system
management platform, using Actel Fusion
®
FPGA. The evaluation board supports an ARM
®
Cortex
TM
-M1 embedded processor on a Fusion device in the FGG484 package. The evaluation
board includes the following:
• Ethernet and USB-to-UART interface for communication with the Fusion FPGA
• SRAM, parallel flash, and SPI flash
• I
2
C interface, organic light-emitting diode (OLED)
• Temperature diode, potentiometer, and pulse-width modulation (PWM) circuit
• Mixed-signal header for several daughter boards to be attached for extended mixed-signal
applications
• Programming stick header so the low-cost programming stick (LCPS) can be attached to the
board for programming
Figure 1-2 • Fusion Advanced Development Kit
OLED
Display
Legacy
Connector
SPI Flash
Memory
RealView
Header
SRAM/Flash
Memory
Navigation-Style
Push Switches
USB/UART
Battery Area
Main 9 V Jack
Main Power
Switch
LEDs
DirectC Header
Potentiometer
Ethernet
Connector
DIP Switches
I2C Header
50 MHz
Oscillator
32 KHz
Oscillator
M1AFS1500-
FGG484
Push-Button
Reset
Power
Programming
Header
Temperature
Diode
Mixed-Signal
Header
Interface
Header
MPM 9 V
Jack
MPM
Area
Push-
Button
PUB
MPM
Power
Switch
Current
Sensor
Gate
Driver
Internet Voltage
Regulator