ACT
pro
1000
Card access door controller
Product Overview
The ACTpro 1000 is a single door controller
with the capacity for 10,000 users. The LCD
display and backlit keypad facilitate ease of
use for the installer and system administrator.
The ACTpro 1000 operates in Standalone
mode or may networked to a PC using the
ACTWin pro application.
Main Features
Single door controller
The ACTpro 1000 may be in turn networked
with other ACTpro 1000s to create a network of
up to 256 doors
RS485 interface to network controllers
10,000 users
16 user groups
16 time zones
Entry and exit reader support
500 event log
1000 user codes (Pin Only)
Installation / Specification Guidelines
The ACTpro 1000 requires a 12 volt dc supply
The controller may not be installed outdoors
unless it is in a sealed and heated cabinet
The ACTpro 1000 controller may be networked
via RS485 to expand the system up to 256
doors maximum
The maximum amount of ACTpro 1000s per
RS485 output is 32 (ACT supply a 4x485
or 1x485 interface for PC networks)
The ACTpro 1000 is compatible with ACTWin pro
and ACTWin pro Lite software packages
The ACTpro 1000 will operate standalone
or can be connected to a PC
For comparisons to our other controllers please
check the comparison chart on the back page
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
ACTpro 1000/2000/3000 Controllers and ACTpro 100
expander require a 12 volts DC supply
ACT
pro
1000 System Schematic
ACT
pro
1000
8 Core Screened
5 Amp
Lock Output
PSU
220/240 Volts AC
Tamper
3 Inputs (100mA)
3 Outputs (100mA)
EXIT
12/24 Volts DC
