ACT
smart
2
system
Network System
Product Overview
ACTsmart2 System allows easy configuration and
maintenance of the ACTsmart2 devices. It consists
of a Windows PC application (ACTWin Smart), the
ACTsmart2 controller unit and a cable to connect
the controller to the PC. The ACTsmart2 devices
are available as Proximity, PIN and Proximity and
PIN only. For cards and fobs for the ACTsmart2
System, please use ACTProx cards and fobs
(see our Ordering Section for further details).
Main Features
Simple graphical interface
Digital keypad backlighting (ACTsmart2 1080/1090)
1 to 8 doors
1000 users
16 user groups
100,000 event log on PC
1,000 event log buffer on controller
Flash upgrade facility
Built in translation facility
Rapid on the fly downloading
Choice of reader types Proximity, Pin
and Proximity and Pin only
Installation / Specification Guidelines
The ACTsmart2 system is designed to suit
access control systems for small to medium
sized enterprises or facilities
The lock and door controls are contained in the
reader and no other controller other than the
ACTsmart2 controller is required
The ACTsmart2 system is strictly an access control
system. Please review the comparison chart on the
reverse side of this leaflet to ensure it is suitable for
customer’s requirements
The maximum cabling distance between the PC
and the Smart2 controller is 30 metres
The maximum network cabling for the readers
is 1.4km of twisted screen pair or category 5
The controller, readers etc require a 12volt
dc supply
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
ACT
smart
2 System Schematic
ACT
smart
2
System
ACTsmart2 Readers networked to a PC via an ACTsmart2 Controller
For full functionality use 12 volts DC only
ACTsmart2
Controller
ACTsmart2 1080
Pin & Proximity
ACTsmart2 1090
Pin Only
Max 8 Units
ACTsmart2 1070
Proximity Only
C
M
Y
CM
MY
CY
CMY
K
