Acson international ACC 10 C/CR, Руководство пользователя

Страница: 3 / 78

2
SPACE SAVING, ELEGANCE AND PRESTIGE
The unit is installed above the ceiling with only the supply and return air grille exposed to view. This ceiling concealed
type of design has made it an “Evergreen” model without sacrificing the precious floor space.
The air-conditioned space will appear as elegant and prestigious as centralized air-conditioned area but with only a
fraction of the cost. This model is ideal for small offices, hotel rooms, hospitals and restaurant applications.
DOUBLE PROTECTION DRAINAGE SYSTEM
High humidity inside the ceiling area is always the main cause of water leaking. By introducing “Built In” double drain
pans solution, i.e. primary drain pan and secondary drain pan, water leaking will not be a problem anymore. The high
quality Polystyrene (PS) primary drain pan come with a layer of thermal forming High Impact Polystyrene (HIPS) coating.
The primary drain pan is specially designed, with mould in gradient, for better condensate water drainage. Furthermore,
the drain pan is made of PS, which is a very good insulation material to prevent sweating. The secondary drain pan will
act as a drip pan to block any water that might be dripped down thus offering an additional protection to the ceiling. In
such a case, additional drain pan will not be necessary during installation which means more cost saving. A drain socket
is supplied to connect both drain pans to the drainage pipe.
EASY AND FLEXIBLE INSTALLATION
The physical height of the unit is only 261mm / 378mm, it is therefore offering greatest flexibility in selecting installation
location.
With its special designed installation accessories, the installation job become easy and better air distribution can be
achieved without extra spending on duct works.
EASY MAINTENANCE
The simple design concept has a friendly maintenance and servicing in mind. Just loosening a few screws, remove
secondary drain pan and drain guide, you can access to all the internal parts from the bottom of the unit. No water will
splash down when removing the secondary drain pan makes the servicing work never easier before.
MEDIUM STATIC PRESSURE WITH A LOW NOISE LEVEL
This new series has a static pressure between 0 to 15 mmAq depend on duct work installation. The casing is well
insulated internally to reduce the noise level.
1. FEATURES