ACS APG8201-B2, Справочное руководство

Страница: 12 / 48

APG8201-B2
– Reference Manual
info@acs.com.hk
Version 1.00
www.acs.com.hk
Page 12 of 48
www.acs.com
.hk
7.1.3. PC_to_RDR_XfrBlock
This command transfers data block to the ICC.
Offset Field Size Value Description
0 bMessageType 1 6Fh -
1 dwLength 4 - Size of abData field of this message
5 bSlot 1 00-FFh
Identifies the slot number for this
command
6
bSeq
1 00-FFh Sequence number for command
7 bBWI 1 00-FFh
Used to extend the CCIDs Block Waiting
Timeout for this current transfer. The
CCID will timeout the block after “this
number multiplied by the Block Waiting
Time” has expired.
8
wLevelParameter
2 0000h RFU (TPDU exchange level)
10 abData
Byte
array
-
Data block sent to the CCID. Data is sent
“as is” to the ICC (TPDU exchange
level).
The response to this message is the RDR_to_PC_DataBlock message.
7.1.4. PC_to_RDR_GetParameters
This command gets the slot parameters.
Offset Field Size Value Description
0 bMessageType 1 6Ch -
1 dwLength 4 00000000h Message-specific data length
5 bSlot 1 00-FFh
Identifies the slot number for this
command
6
bSeq
1 00-FFh Sequence number for command
7
abRFU
3 - Reserved for future use
The response to this message is the RDR_to_PC_Parameters message.
7.1.5. PC_to_RDR_ResetParameters
This command resets the slot parameters.
Offset Field Size Value Description
0 bMessageType 1 6Dh -
1 dwLength 4 00000000h Message-specific data length
5
bSlot
1 00-FFh
Identifies the slot number for this
command
6
bSeq
1 00-FFh
Sequence number for command.
Note: No related to the slot number
and rolls over to 00h after FFh.