ACS ACR330 Скачать руководство пользователя страница 61

Страница: 61 / 61

ACR330 Validator with QR Code Scanner

– User Manual

[email protected]

Version 1.02

www.acs.com.hk

Page 61 of 61

www.acs.com

.hk

3.7. Re-flashing the Device

The ACR330 requires re-flashing when the firmware upgrade is interrupted or the loaded firmware
fails to run some components.

To get the image file, please contact an ACS representative.

a. Plug in an SD card (4GB or above) to a PC.
b. Open Win32 Disk Imager application.

Note: The Win32 Disk Imager application may be downloaded online for free.

c.  Select the image file and locate the SD Card.
d.  Click Write and wait for the progress bar to be completed.
e.  Plug in the SD card into the SIM slot of the ACR330. The exact location of the SIM slot is

shown in the image below.

Turn on the ACR330.

Note: If the device does not turn on, press the power button on the top right corner of the
bottom casing.

g. The ACR330 will be upgraded automatically. The LED will keep blinking until it turns off. This

indicates that re-flashing is completed.

h. Remove the SD Card and reboot the device for the changes to take effect.

Содержание ACR330






























































Результаты поиска

Содержание ACR330

Отзывы:

Похожие инструкции для ACR330

Бренды по названию

Популярные бренды

ACS ACR330, Руководство пользователя

Результаты поиска

Содержание ACR330

Отзывы:

Похожие инструкции для ACR330

Бренды по названию

Популярные бренды