manualshive.com logo in svg

Acrosser Technology AIV-QM97V1FL Series, Руководство пользователя, Страница: 73 / 76

Поделиться
Скачать
Acrosser Technology AIV-QM97V1FL Series Скачать руководство пользователя страница 73

AIV-QM97V1FL Series User Manual

73

www.acrosser.com

6.  FAQ

Q 1.  Does my system support any other OS?

•  Please check with Acrosser local sales representative or authorized channels to 

help you confirm whether a new OS driver is provided.

Q 2.  What if the screen blacked out when installing Linux?

•  Check the screen cable connection. Reboot the system.
•  Check the screen cable connection. Key in 

CTRL+ALT+F2

 to enter Terminal 

screen. Log in and then input startx.

Q 3.  What should I do if the ubuntu 14.10 cannot be installed correctly?

• 

Install the ubuntu14.04 first, and then upgrade to ubuntu14.10 to fix this situation

.

Q 4.  What if the bluetooth device cannot work correctly in Linux?

•  Install the 

"

blueman and bluemon tool

" to fix this situation

.

Q 5.  How to install Sierra EM7305 EM7355 module driver under Linux?

•  Please follow these steps:

Step 1:  Open terminal
Step 2:  su
Step 3:  gedit /etc/modprobe.d/blacklist.qc.conf
Step 4:  add "blacklist qcserial" to /etc/modprobe.d/blacklist.qc.conf
Step 5:  add "blacklist qmi_wwan" to /etc/modprobe.d/blacklist.qc.conf
Step 6:  save /etc/modprobe.d/blacklist.qc.conf

Step 7:  gedit /etc/sysconfig/grup
Step 8:  find GRUB_CMDLINE_LINUX=

Step 9:  GRUB_CMDLINE_LINUX= add rd.driver.blacklist=qmi_wwan

Step 10:  save /etc/sysconfig/grup
Step 11:  grub2-mkconfig -o /boot/grub2/grub.cfg

Step 12:  cd GobiNet
Step 13:  make 
Step 14:  make install
Step 15:  cd GobiSerial
Step 16:  make
Step 17:  make install
Step 18:  reboot
Step 19:  use nm-connection-editor set SIM Card Pin Code
Step 20:  Use Default Mobile broadbad AP

Содержание AIV-QM97V1FL Series













































































Отзывы:

Нет отзывов