Acroprint HEAVY-DUTY DOCUMENT CONTROL STAMP Скачать руководство пользователя страница 1

USER MANUAL

HEAVY-DUTY DOCUMENT 

CONTROL STAMP

5640 Departure Drive

Raleigh, NC 27616-1841

919.872.5800

In USA: 800.334.7190

Fax: 919.850.0720

Email: [email protected]

www.acroprint.com

GENERAL INFORMATION

CAUTION: For your safety and to prevent damage to the machine, we recom-

mend that you remove the line cord from the wall receptacle when setting or 

replacing the ribbon.

For repairs, please contact your authorized Acroprint dealer.

MAINTENANCE

To obtain the best results from your Electric Stamp, we recommend periodic inspections, cleaning, 
and lubrication each year by an authorized dealer.  For further information contact your dealer or 
Acroprint Time Recorder.

NOTE:  This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause harmful interference 
to radio communications. Operation of this equipment in a residential area is likely to cause 
harmful interference in which case the user will be required to correct the interference at his own 
expense.

MACHINE REFERENCE

  

Date Purchased __________________________________________________________

  Model No. _____________________________ Serial No. _________________________

  Key No. ______________________

  Dealer _________________________________________________________________

  Address ________________________________________________________________

  City _____________________________ State ____________ Zip __________________

  Phone No. ____________________________________

5640 Departure Drive

Raleigh, NC 27616-1841 USA

IN USA 800.334.7190

919.872.5800

www.acroprint.com

06-0103-001  Rev N

Содержание HEAVY-DUTY DOCUMENT CONTROL STAMP

Страница 1: ...ection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the u...

Страница 2: ... record the above information in the information reference section on the back page making sure to list your key number Before operating your Acroprint Heavy Duty Document Control Stamp please read these instructions completely For optimum performance do not plug stamp into an electrical circuit with other office machines or applianc es Caution should be used when stamping forms with paper clips o...

Страница 3: ...n Typehead Push down on the 2 lock levers at the same time pull up on the typehead See Figure 2 Setting Typewheels Set the typewheels by pushing the Ratchet on the side of the typewheel down See Figure 4 Make sure the typewheel seats correctly you will hear a distinct click when the typewheel seats Model Notes Time Date Stamps ET and ETC After setting the machine will keep the time and date automa...

Страница 4: ...ur hands and clothes 1 Unplug machine 2 Open cover and typehead see Setting for instructions 3 Grasp the Ribbon mechanism upper tie bar and pull upwards and then out 4 Place the ribbon mechanism on a sheet of paper with the ribbon facing down 5 Depress and hold down the front ribbon feeler lever Push the back of the spool towards you until it clears the ribbon drive shaft then pull the spool off o...

Отзывы: