Chapter 7. Appendix: Specifications
Table 7.1.1 – continued from previous page
Redundancy
Hot-swappable data disk drives
2x hot-swappable power supplies
No single point of failure
Non-disruptive online software upgrades
Monitoring, management
CLI, GUI, API, IPMI
7.1.1 Power Supply Specifications
The following table lists appliance power supply specifications.
Voltage, frequency
100-240 V, 50/60 Hz
Power consumption, W
750
Heat dissipation max (BTU/hr)
2,300
Max inrush, A
40
Input current
AC input
Max. current
100–127 Vac, 8.8 A
200–240 Vac, 4.3 A
Power supply efficiency
(Platinum class)
10% load
20% load
50% load
100% load
80%
90%
94%
91%
Input power factor correction*
Output power
20% load
50% load
100% load
Power factor
>0.80
>0.95
>0.95
* Tested at 230 Vac, 50 Hz and 115 Vac, 60 Hz. The input power factor is greater than values in the table at
power supply’s rated output and meets Energy Star® requirements.
7.2 Environmental Specifications
Appliance environmental specifications are listed in the following tables.
Store temperature
-40°C to 85°C (-40°F to 185°F)
Store temperature gradient
20°C (68°F) per hour
Operating temperature
10°C to 35°C (50°F to -95°F)
Operating temperature gradient
20°C (68°F) per hour
Continued on next page
24
