MiniPuck Model ST132-06x0 Two-Wire TC/mV Transmitter
_________________________________________________________________________________
______________________________________________________________________________________
Acromag, Inc. Tel: 248-295-0880 Email:
16
CONFIGURATION
STEP-BY-STEP
Reconfiguration
After executing the Acromag
Configuration software for this
model, a screen similar to the
one at right will appear, if you
have not already connected to
your transmitter via USB (note
some fields are faded out
under these conditions).
Note that without a device
already connected via USB,
the System Status window at
the bottom of the screen
prompts you to “Connect a
ST132
to a USB port”.
After you connect a transmitter
to the USB port, the software
will automatically detect it and
the screen will change similar
to the one at right.
Note that with a device already
connected via USB, the
System Status window
prompts you to “Select a
device from the drop-down
box above and click Open”.
HELP
– You can press F1 for
Help on a selected or
highlighted field or control.
You can also click the [?]
button in the upper-right hand
corner of the screen and click
to point to a field or control to
get a Help message pertaining
to the item you pointed to.