Acromag SP33 0700 Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 37

Acromag SP33 0700 Series Скачать руководство пользователя страница 27

Acromag, Inc. Tel: 248-295-0880

- 27 -

https://www.acromag.com

Model SP33X-0700

4-Wire DC I/V Signal Splitter w/USB

ACCESSORIES

Software Interface Package

Software Interface Package/Configuration Kit

–

Order TT-SIP

•

USB Signal Isolator

•

USB A-B Cable 4001-112

•

USB A-mini B Cable 4001-113

•

Configuration Software CDROM 5040-TBD

This kit contains all the essential elements for configuring SP family Splitters.
Isolation is recommended for USB port connections to these splitters and will block
a potential ground loop between your PC and a grounded input. A software
CDROM is included that contains the Windows software used to program SP
splitters.

USB Isolator

USB Isolator

–

Order USB-ISOLATOR

•

USB Signal Isolator

•

USB A-B Cable 4001-112

•

Instructions 8500-900

This kit contains a USB isolator and a 1M USB A-B cable for connection to a PC. This
isolator and cable are also included in TT-SIP (see above).

USB A-B Cable

USB A-B Cable

–

Order 4001-112

USB A-B Cable 4001-112

This is a 1 meter, USB A-B replacement cable for connection between your PC and
the USB isolator. It is normally included with the TT-SIP Software Interface Package
and with the isolator model USB-ISOLATOR.

USB A-mini B Cable

USB A-mini B Cable

–

Order 4001-113

•

USB A-mini B Cable 4001-113

This is a 1 meter, USB A-miniB replacement cable for connection between the USB
isolator and the SP33x splitter. It is normally included in TT-SIP.

Note that software for all SP Series models is available free of charge, online at
www.acromag.com.

«
...
25
26
27
28
29
...
»

Содержание SP33 0700 Series






































Отзывы:

Нет отзывов