Acromag, Inc. Tel: 248-295-0880
- 19 -
Model SP33X-0700
4-Wire DC I/V Signal Splitter w/USB
Configuration
Note that you should already have power connected to the
transmitter at this point. This model does not utilize USB power and
you will not be able to configure, calibrate, or test the unit without
power applied.
After executing the Acromag Configuration software for this model,
the screen shown at left will appear, if you have not already
connected to your transmitter via USB (note fields are blank under
these conditions).
Connect your PC to the unit via USB, and the unit’s model
-serial
information will appear in the Device field as shown in the second
screen at left.
If you happen to be connected to more than one unit via a USB hub,
you can use the Device scroll field to select another unit, using the
serial information suffix of the Device Model number to discern one
unit from another.
Once you have selected a device, click the
[Open]
button to open
communication with the unit.
After clicking [Open], the selected unit’s Model, Serial Number,
Manufacturer, and connection status message will be displayed as
shown in the first screen on the next page.
TIP:
Always Close a connection with one device before selecting
another device. Make sure you have the correct model software for
the model you are configuring.