Acromag microBlox Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 29

Acromag microBlox Series Скачать руководство пользователя страница 15

microBlox® Transmitter/Alarm Carrier

Model uBTA-H-1MR/uBTA-H-1SR/uBTX-H-1

Acromag, Inc. Tel: 248-295-0880

- 15 -

http://www.acromag.com

- 15 -

https://www.acromag.com

CONFIGURATION SOFTWARE

The alarm functionality of this carrier is setup inside the Bluetooth wireless technology uB module plugged into it. You
may configure alarm operation via our Agility mobile app and a Bluetooth wireless technology link to your Android or iOS
smartphone or tablet. The Agility software can be downloaded free of charge from our web site at

www.acromag.com

Quick Overview

The screen at left is the uBTA Alarm configuration screen of
the Agility mobile app. To configure a uB input module for
installation in the alarm carrier, select the uBTA Alarm tab

and drag the “Alarm Carrier Attached” switch right to ON as

shown. Scroll down the page to complete the Alarm
configuration.

This carrier provides two independent alarm relays for the
input module and one or both relays may be configured as
either a high, low, or window alarm, each with its own dead-
band control using the screen at left (scroll down). You can
set limits for each relay and/or specify a Reverse Acting
alarm if you want fail-safe alarm action (failsafe refers to
matching the alarm state of the contacts to the power-off
state). Note that a window alarm may be configured for
either relay and would trip for any input level outside the
window defined by the high and low values specified for the

relay (see Alarm operation on page 15). Orange Relay LED’s

on the unit indicate the relay energized condition.

For complete information on Agility, please refer to its
instruction manual 8501-044, available for download from
our web site at

www.acromag.com

«
...
13
14
15
16
17
...
»

Содержание microBlox Series






























Отзывы:

Нет отзывов