Acromag ACPS3310 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 25

Acromag ACPS3310 Скачать руководство пользователя страница 5

AcroPack Series ACPS3310

CompactPCI-Serial Carrier Board

- 5 -

replace several dedicated function PCI or PCIe bus boards. The ACPS3310 non-
intelligent carrier board provides impressive functionality at low cost.

Model

Input/Output AcroPack Slots Operating Temperature

Range

ACPS3310

Front I/O

2 (A, B)

-40 to +85



C

(with 200 LFM airflow)

KEY ACPS3310 FEATURES

Interface for AcroPack modules

–

The ACPS3310 provides an electrical and

mechanical interface for up to two industry standard mini-PCIe or AcroPack
modules. AcroPack modules are available from Acromag. Mini-PCIe cards are
available from other vendors in a wide variety of input/output configurations
to meet the needs of varied applications.

PCI Express

Version 2.1 Compliant Carrier: -

Includes a PCIe switch to allow

two PCIe devices (AcroPack or mini-PCIe) to share a single 4HP peripheral
board slot in a CPCI-S chassis.

Board Identification

–

A unique carrier and site number is determined from

geographical addressing signals GA0-GA3 from the backplane. This feature
provides the capability to distinguish a particular carrier and AcroPack module
from others when multiple instances of the same carrier and/or module are
used in a system.

JTAG Programming Header

–

A standard 14-pin Xilinx JTAG programming

header is provided for programming and debugging the FPGA on some
AcroPack modules. The JTAG ports of the two AcroPack modules are daisy-
chained.

Individually Fused Power

- Fused +1.5V, +3.3V, +5V, +12V, and -12V DC

power is provided. A fuse is present on each supply line serving each AcroPack
module. Fuses F1-F3 and F7-F9 are user replaceable. Fuses F4-F6 and F10-F12
are not user replaceable, you must return the board to Acromag to replace
these fuses.

SIGNAL INTERFACE PRODUCTS

This AcroPack carrier board will mate directly to all industry standard mini-
PCIe and AcroPack modules. Acromag provides the following interface
products (all connections to field signals are made through the carrier board
which passes them to the individual AcroPack modules):

Cable

Model 5028-420 Round cable, shielded, 34 twisted pairs, male SCSI-3
connector to 68-pin CHAMP 0.8mm, 2 meters long.

Model 5028-615 Cable, 68-pin CHAMP to pigtail, 36 inches long.

Model 5028-616 Cable, 68-pin CHAMP to pigtail, 70 inches long.

«
...
3
4
5
6
7
...
»

Содержание ACPS3310


























Отзывы:

Нет отзывов