Acromag ACPS3310 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 25

Acromag ACPS3310 Скачать руководство пользователя страница 21

AcroPack Series ACPS3310

CompactPCI-Serial Carrier Board

- 21 -

CAUTION: POWER MUST BE TURNED OFF BEFORE REMOVING OR INSERTING BOARDS

WHERE TO GET HELP

If you continue to have problems, your next step should be to visit the
Acromag website at

https://www.acromag.com

. Our website contains the

most up-to-date product and software information.

Go to the “Support” tab or your specific AcroPack model ordering page.

Acromag’s application engineers can also be contacted directly

for technical

assistance via email, telephone, or FAX through the contact information listed
below. Note that an email question can also be submitted from within the

Knowledge Base or directly from the “Contact Us” tab. When needed,

complete repair services are also available.

Phone: 248-295-0310
Email:

[email protected]

5.

SPECIFICATIONS

PHYSICAL

Physical Configuration

Length (ACPS3310) ........................ 6.299 inches (160.00 mm)
Height ............................................. 3.937 inches (100.00 mm)
Board thickness .............................. 0.063 inches (1.60 mm)
Max component height ................. 0.402 inches (10.21 mm)
Max component height under AcroPack modules

0.0789 inches (2.00 mm)

Weight............................................ 5.57 oz. (158 g)

Connectors

P1 (CPCI-S) ..................................... 72-pin header, AIRMAX (Amphenol 10052825-101LF)
J3 (Carrier Field I/O) ....................... 68-pin, Stacked, Champ (TE Connectivity 5787962)
P7, 8 (AcroPack Field I/O) .............. 100-pin socket (Samtec SS5-50-3.00-L-D-K-TR)
J1, 2 (Mini-PCIe) ............................. 52-pin socket (TE Connectivity 1759457-1)
P9 (JTAG) ........................................ 14-pin header (Molex 87832-1420)

Isolation

This AcroPack carrier is designed to provide isolation between the AcroPack Field I/O signals and the host.
The AcroPack module must also be an isolated AcroPack module to maintain the isolation between the logic
and field I/O signals. Unless isolation is provided on the AcroPack module itself, the field I/O connections are
not isolated from the PCIe bus.

Host logic and field I/O are isolated from each other for voltages up to 250VAC or DC on a continuous basis
(unit will withstand a 1500V AC dielectric strength test for one minute without breakdown). The carrier is
designed to be used with isolated AcroPack modules.

«
...
19
20
21
22
23
...
»

Содержание ACPS3310


























Отзывы:

Нет отзывов