1
1
Overview
ARTU remote terminal unit is a high-performance intelligent distribution element, which is applied in intelligent
distribution, industrial automation and other fields.Products include: remote control unit, remote signaling unit.
Meet the standards:
JB/T 10388-2002 General technical conditions for intelligent measurement and control node products with bus
communication function
GB/T 13729-2002 Remote terminal equipment
2
Model instruction
3
Product Features
1) The product has channel status indicator light and communication status indicator light.Among the two
communication interfaces, one is used for setting and debugging common parameters, and the other is used for
reading and setting "four-remote" values.
2) The address and baud rate of the product can be set by upper computer or local dial code switch.
3) The product adopts software and hardware "watchdog" technology to prevent the phenomenon of crash
4
Use conditions
1) Auxiliary power supply:
24VDC, allowing 18 ~ 36VDC
220VAC (DC) allows AC85 ~ 275V or DC100 ~ 350V, subject to the actual wiring diagram.
2) Power consumption: ≤5W
3) Working environment: -5 ~ +55℃
4) Relative humidity: ≤95%RH, non-condensation, non-corrosive gas
5) Storage temperature: -25 ~ +70℃
6) Altitude: ≤2500m
7) Protection level: IP20
8) Insulation strength:
Conventional: 2kV/1min, 50Hz
Artu-kj8:1kV/1min between power supply, communication and switching input, 50Hz;
Relay and power / / communications / / switch between input and 2 kv / 1 min, 50 hz
9) Installation method: TS35 guide rail installation
10)EMC performance meets the following standards:
GB/T 17626.2 Electrostatic discharge immunity test class 4
