10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368
www.aimco-global.com
10000 SE Pine St. Portland, Oregon 97216 Phone: 1-800-852-1368
www.aimco-global.com
7
2.3.1. Basic safety measures (must always be observed!):
• Keep your work area in good condition
• A disorderly work area can result in an accident
• Take environmental factors into account
- Do not expose the charger station to rain.
- Do not use the charger station in a humid or wet environment.
- Ensure that there is sufficient illumination.
- Do not use the charger station in the proximity of flammable
liquids or gases.
• Keep children away
- Do not allow other persons to touch the device or cable;
keep them away from your work area.
• Use the correct device
- Do not use the charger station for purposes and work for
which it was not intended.
• Do not misuse the cable
- Do not pull the plug out of the power socket by the cable.
- Protect the cable against heat, oil and sharp edges.
• Maintain your device with care
- Keep charger station clean for better and safer operation.
- Regularly inspect the cable and, in case of damage, have it
replaced by a qualified expert. Keep the device dry and
free of oil and grease.
• Pull out the main power plug when not in use and before
maintenance.
• Inspect your device for damage
- Before using the charger station, the protective equipment
or damaged parts must be tested to ensure problem-free
functionality according to their intended purpose.
- Check whether moving parts function properly and determine
whether or not they jam, whether any parts are broken, whether
all other parts are flawless, are correctly installed and whether all
factors that could influence operation of the device are OK.
- Damaged protection equipment, switches, and other parts
should be properly repaired or replaced by a customer
service center.
• Protect yourself against electric shock
- Avoid any body contact with grounded parts, e.g. pipes,
radiators, stoves, refrigerators.
• Replacement parts
- For repair and maintenance, only original replacement parts
obtained from AIMCO may be used.
