background image

CONTENTS

Introduction 

 

 

Safety instructions   

 

Control locations front panel

Connection locations rear panel 

Installation and position 

 

Making connections to this amplifier 

Using the amplifier   

 

Care and maintenance 

 

Trouble shooting   

 

Specifications 

 

 

Contact details 

 

 

Congratulations on purchasing this Acoustic Solutions’ integrated amplifier. It has been developed following an extensive 

research and development program that has culminated in what we regard as an exceptional mid-range hi-fi product.

Our aim when designing this product was to produce a visually appealing unit which would look comparable to higher priced 

products, and give an exceptional performance to match.

We trust that this amplifier will give you hours of listening pleasure, and provide years of unparalleled performance. As with any 

new electrical product please be patient and allow at least 36 hours use before all components have acclimatised themselves 

to your surroundings, and found their optimum working temperature. Please do not operate this product at high volume levels 

immediately after switching on. 

      

INTRODUCTION

HI-FI SEPARATES 

PAGE No.

1

SP100 INTEGRATED AMPLIFIER

1

2

3

4

5

6

7-13

14

14-15

16

17 

 

 

Содержание SP100


















Отзывы: