Date: 04/12/21
Part #: 5914-000-001
INSTALLATION, OPERATION
& MAINTENANCE MANUAL
Page 1 of 11
WEDGE™ MODELS:
WSW130
WSW390
WSW4120
STAINLESS STEEL TROUGH
ADA/OBC COMPLIANT
WSW260
NEO-METRO FIELD SERVICE
TOLL FREE
800-743-8259 •
LOCAL
626-855-4866 •
FAX
626-855-4863
Model Shown: WSW130-SW000-F60
®
®
N E O - M E T R O b y A C O R N
Acorn Engineering Company
15125 Proctor Ave. • City of Industry, CA 91746 USA
TF 800.488.8999 • PH 626.336.4561 • FX 626.961.2200
ANSI, UFAS or ADA compliance is subject to the interpretation and requirements of the local code authority and
is the responsibility of the installer for verification.
Prior to installation, supply lines must be flushed of all foreign material such as pipe dope, chips, or solder.
Debris or foreign material in water supply may damage valve.
Industry standard wall backing, for wall hung fixtures, is required. Installer provided wall anchors and wall
anchoring hardware must be appropriate for wall construction, and have a minimum pull-out rating of 1000 lbs.
(453.6 kg).
Teflon tape is recommended on all threaded waste and supply connections to reduce the possibility of leaks.
Important: Some options may slightly alter installation. To ensure proper installation review the manual
thoroughly and verify rough-ins before beginning any work. File this manual with the owner or maintenance
personnel upon completion of installation.
NOTE: When applicable, receptacle(s) must be wired to a GFCI protected circuit. Fixture must be earth
grounded per N.E.C. (National Electrical Code).
Acorn warrants that all of its products are guaranteed against defective material or poor workmanship for a
period of one year from date of shipment. Acorn's liability under this warranty shall be discharged by
replacing without charge F.O.B. City of Industry, California, any goods, or part thereof, which appears to the
company upon inspection to be of defective material or not of first class workmanship, provided that claim
is made in writing to the company within reasonable period after receipt of the product. Where claims for
defects are made, the defective part or parts shall be delivered to the company, prepaid, at City of Industry,
California for inspection. Acorn will not be liable for the cost of repairs, alterations or replacement, or for
any expense connected therewith made by the owner or his agents, except upon written authority from the
Acorn City of Industry office. Acorn will not be liable for any damages caused by defective materials or poor
workmanship, except for replacements, as above provided. Contact local Acorn Representative for
complete terms and conditions.
WARRANTY INFORMATION
