Installation
46/ 100
Oleolift-C
IMPORTANT
the sealing insert must be
positioned tightly on the socket pipe.
The sealing insert has 4 drill holes with
“placeholders”.
Î
Fold open the sealing insert and remove
"placeholder" (5).
Î
Place the connection cable and cable
extension in the recesses of the seal
insert half (6) and pull it through
the cable conduit into the terminal
compartment of the control unit.
Î
Fold the upper half of the sealing insert
onto the lower half (7).
7.
5.
6.
Î
Place the split sleeve around the insert.
Î
Re-fit the clamp (8).
Î
Screw on the threaded connector (9)
slightly.
9.
8.
Î
Push the cable feed-through into the
socket tube.
Î
Tighten the threaded connector
uniformly cross-wise until it is hand-tight.