manualshive.com logo in svg

ACO Oleolift-C, Инструкция по эксплуатации, Страница: 41 / 100

Поделиться
Скачать
ACO Oleolift-C Скачать руководство пользователя страница 41

Installation

41/ 100

Oleolift-C

The connection cable (10 m long) is already connected in the terminal box of the submerged 
pump in the ready to deliver status, cable type   Chapter 7.2 “Submerged pumps”. 

IMPORTANT

 Protect the end of the connecting cable against the penetration of moisture.

Allocation of the optimised or intended submersible pumps to the respective nominal size (NS) 
of the plant,   Chapter 2.1.2 " Tank".
The description applies to both submerged pumps:

 

Î

Assemble the shackle on the handle 
of the submersible pump and/or lay 
the chain around the submerged pump 
handle and connect two chain links with 
the shackle.

 

Î

Lift the cover out of the cover frame 
above the pump station chamber and 
store to the side.

 

Î

Lower the submerged pump on the chain 
into the tank.

 

Î

Thread the coupling piece for the 
submerged pump onto the sliding pipe: 
Position 

X

. 

X

 

Î

Lower the submerged pump further until 
the coupling piece sits in the underwater 
automatic coupling.

 

Î

Hook the chain onto the chain holder.

Содержание Oleolift-C





































































































Отзывы:

Нет отзывов