Product Description
15/ 100
Oleolift-C
■
Socket with socket seal (connection on-site to ventilation pipe)
■
Socket pipe with socket seal (connection on-site to reserve cable conduit) and cable
gland (sealing insert)
■
Direct extraction of the separator chamber (right or left version) with compression
fitting (optional), connection of on-site disposal pipe
Separator chamber
■
standard-compliant interior coating provides additional, permanent resistance and thus
permanent structural protection
*
■
Submersible inlet pipe made of stainless steel
■
Submerged outlet pipe with valve seat and guide for coalescence insert, made of
polyethylene (PE-HD)
■
Coalescence insert
Supporting cage made of polyethylene (PE-HD) with mounted holder for high liquid
level sensor
NS 3 - 10: Coalescence mat made of a combination knitted wire mesh (stainless
steel and polypropylene)
NS 15 - 30: Coalescence mat made of polyurethane foam (PPI 10)
■
Submersible pipe for direct suction (optional)
■
Warning system type idOil 30 for checking the thickness of the oil layer and liquid level:
3x sensor mounting set
2x oil layer sensor idOil-OIL with 5 m connection cable (message 80 % and 100 %)
1x idOil-LIQ high liquid level sensor with 5 m connection cable
■
Cable connector LCJ3
Pump station chamber
■
standard-compliant interior coating provides additional, permanent resistance and thus
permanent structural protection
*
■
Inlet pipe (overflow pipe from separator chamber) made from polyethylene (PE-HD)
■
Pressure pipe unit:
Piping made from PVC-U up to approx. 30 – 40 cm outside the pump station chamber
2x underwater coupling system with short guide pipe (slider pipe) made from plastic
2x Ball check valve made of cast iron EN-GJL
1x Ball valve made of PVC-U and/or gate valve made from cast iron
1x flush pipe connection possibility
■
Universal special bracket made from stainless steel
■
Connection socket DN/OD 110 with socket seal (connection on-site to reserve cable
conduit and/or ventilation pipe)