888-490-9552
www.acousa.com
OLEOP
AT
OR P OPERA
TION MANU
AL
17
ACO Separators
Alarms Assembly Instructions
1 Fitting position of sensor support
red circles.
CAUTION
Do not mount support above inlet
or outlet.
2 Sensor setting
sensors. The detail shows the extension of the sensor ca-
“idOil-30 Installa-
”. The di
ff
erent sensors
−
H3,
referring to = upper edge of inlet submersible pipe (1).
(For dimensions, see below table).
Alarms Assembly & Initialization Instructions
6
6.1 FITTING POSITION OF SENSOR SUPPORT
The illustrations below depict correct fitting position of sensor support with separators
without and with top system. The sensor cables or the extension cables (optional) are
laid up to the monitoring device through an in-situ empty tube.
The preferred fitting positions are marked by red circles.
CAUTION: Do not mount support above inlet or outlet.
ACO Separators
Alarms Assembly Instructions
1 Fitting position of sensor support
red circles.
CAUTION
Do not mount support above inlet
or outlet.
2 Sensor setting
sensors. The detail shows the extension of the sensor ca-
“idOil-30 Installa-
”. The di
ff
erent sensors
−
H3,
referring to = upper edge of inlet submersible pipe (1).
(For dimensions, see below table).
Separator without Access Shaft
Separator with Access Shaft