ACO FAM-P Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 41

ACO FAM-P Скачать руководство пользователя страница 40

-

40

-



E-lock opening time - 4 [s]



Further door opening function deactivated



Additional INPUT: Open (value "0")



Restoring the factory settings (reset) of the panel from the keypad enabled



Additional range set to from 1 to 255



Code opening without key (except FAM-P-ZS and FAM-PV-ZS)



Code for the bottom button (apartment 1): 1111 (except FAM-P-ZS and FAM-PV-ZS)



Code for the top button (apartment 2): 2222 (except FAM-P-ZS and FAM-PV-ZS)



I/O function active: second gate opening



I/O function active: basic opening having to connect with the apartment



Maximum conversation time: 120 [s]



Maximum number of openings: 3



No proximity fobs stored in memory

XV. MAINTAINING CLEANLINESS

Clean the panel with a damp or antistatic cloth. Do not use any solvents!

IMPORTANT!

When disinfecting panels made of stainless steel, use cleaning agents based on

alcohol only. Any chlorides (which are present in common cleaning products) are harmful to the steel
surface, causing abrasion of its natural protective coating and increasing the risk of corrosion.

XVI. SAFETY RULES FOR INSTALLATION AND USE



Installation should be carried out by a qualified installer



Before removing the panel, turn off the power supply



Avoid unstable power sources and electrical surges as these may cause malfunction or

damage to the equipment



It is mandatory to ground the housing (via the marked terminal on the panel housing) using a
suitable PE.



When trained to operate the system, the user should be briefed that any errors in its

operation may only be corrected by a qualified and authorised person.



Do not expose the panel to any kind of corrosive chemicals, as this may damage the unit.



The applicable OHS regulations must be observed when working on the door

entry system.

XVII. RULES FOR STORING WASTE ELECTRICAL EQUIPMENT

Waste electrical equipment must not be disposed of with other waste. It should be stored in places
designated for this purpose. For this purpose, please contact the responsible institutions or
companies involved in waste recycling - Directive 2002/96/EC of 27.01.2003

«
...
38
39
40
41
»

Содержание FAM-P










































Отзывы:

Нет отзывов