-
38
-
Example settings:
Settings
Remar
ks
Opening the second gate
using the code ("double
key"), using the F2 button
on the uniphone and
opening the gate without
making a call (pick up the
handset and press the "key"
button three times)
Port P1:
IN=x (x: has no
effect)
OUT=0
NrF=3
Port P2:
IN=x (x: has no
effect)
OUT=t (t: time from
1 to 255 s)
NrF=2
Connect outputs of port P1 and P2 in
parallel ("N" with "N", "NO" with "NO" )
For INS-UP720MR and INS-MPR it is
enough to press the "key" once without
lifting the handset
Opening the second gate
using the code ("double
key"), using the F2 button
on the uniphone and
activating the E-lock
without making a call (pick
up the handset and press
the "key" button three
times)
Port P1:
IN=x (x: has no
effect)
OUT=t (t: time from
1 to 255 s)
NrF=3
Port P2:
IN=x (x: has no
effect)
OUT=t (t: time from
1 to 255 s)
NrF=2
For INS-UP720MR and INS-MPR it is
enough to press the "key" once without
lifting the handset
Opening the second gate
using the code ("double
key"), using the F2 button
on the uniphone without
making a call via the third
wire to the uniphone (only
INS-720M, INS-720MR)
Port P1:
IN=0
OUT=t (t: time from
1 to 255 s)
NrF=0
Port P2:
IN=x (x: has no
effect)
OUT=t (t: time from
1 to 255 s)
NrF=2
Connect outputs of port P1 and P2 in
parallel ("N" with "N", "NO" with "NO" )
Additional number 1 and 2:
Optio
n
Functionality
Additional
number 1
Value dialled from numeric keypad for additional number 1
Address
Physical address to which the panel will call after dialling the additional number
Tone
Ringtone in the apartment after dialling the additional number
Number of
ringtones
Number of ringtones during a call to the apartment after dialling the
additional number
Sound volume
Volume during a call to the apartment after dialling the additional number
Auto-opening*
Enabling auto-opening (door opening / activating the ELOCK output) after a
call from the additional number, if a hung-up handset is detected in this
apartment
Only calling
Disabling a call to a selected apartment (uniphone will only ring, the panel
will not establish a call after picking up the receiver)
* If this function is activated and the handset is not hung up during a ringing tone, door opening will
start automatically after the first ringing tone. If the handset was hung up during the first ringing tone,
the panel works normally - the handset can be picked up and communication is possible. The
automatic opening function most commonly used in commercial buildings - letting people in is done
by simply lifting the handset; after business hours the handset is hung up and the door entry unit
works normally.
When the physical addresses of the direct call buttons correspond to additional numbers, they can
also perform the auto-open function.
If the primary numbers and additional numbers overlap, the latter have priority and calling in these
cases is always made according to their settings. The access code of an active additional number is
the code of its physical address.