Installation and user manual for letterbox with integrated COMO-PRO-POST-A1 / COMO-
PRO-POST-V1 PRO series digital door entry unit
GENERAL INFORMATION
Pass-through letterbox with integrated door entry unit for mounting in a fence post or wall. The solution is designed for single-family dwellings
where the letterbox and door entry unit are integrated. The box can be installed separately, its depth is adjustable to match it with the post or wall thickness.
The front of the letterbox and the rear door for mail removal are made of stainless steel and ensure effective mechanical and weather protection.
An inner drawer made of painted galvanised steel will accommodate a large quantity of mail that can be conveniently removed from inside the fence by
opening the key-locked box door (supplied).
The front panel features a drop-down flap to secure the letterbox drop and a backlit call button. The box features an illuminated description field
to fill in apartment number or other information. It also features an integrated a proximity key fob reader for opening the gate/door directly from the box (two
key fobs are included).
The COMO-PRO-POST-A1 model is a door entry unit version with audio communication only, and the COMO-PRO-POST-V1 model also features a dome
camera and is a version of a video door entry unit. In both versions the door entry unit operation is the same, in the audio version only the video functions
are omitted. It is also possible to connect an independent external camera to the audio version of the door entry unit - the system operation will be similar
to that with a built-in camera (for details of this solution, contact Aco technical department).
Operation of the letterbox built-in door entry unit is similar to that of COMO-PRO series panels (generation 3 PRO panels). The door entry unit
supports receivers of the PRO system: video receivers include such as MPRO 7/GLASS-PRO-7, MPRO 4, and the UPRO audio receiver. The door entry
unit is easy to handle, functional and its installation is simple. After connecting the optional PRO-I/O module (module with built-in relay and input for
additional button) it also enables control of external devices, such as gate, barriers, roller shutters, lighting. The PRO-I/O module can also function as a
doorbell - after connecting the bell button, PRO receivers will ring in different ringtones (PRO receivers can also be connected directly to the bell button,
but it is necessary to install additional cables to each receiver that is to perform this function).
The wiring (topology) of the door entry unit is based on UTP min. cat. 5e for a video door entry unit or any three wires for an audio door entry
unit Note that cable cross-section is important for maximum distance between the power supply and components of the door entry system.
The door entry unit is preconfigured in a way that its settings are suitable for most cases - therefor no configuration of the unit is necessary - it
will work immediately after powering up. Configuration of all settings is possible only via the "PRO 3 MANAGER" PC application and optional PRO-USB
modules for connecting the system to a PC (to be purchased separately). The PRO 3 MANAGER application can also be used to manage proximity key
fobs and for software updates. All applications are available free of charge from www.aco.com.pl. PRO-USB can be connected anywhere in the intercom
installation and will manage the settings of all generation 3 PRO devices. Adding and deleting proximity key fobs is also possible using the master key fob,
which is included in the set (without connecting the panel to a PC).
Generation 3 PRO includes:
- Programming settings and software update via system bus (optional PRO-USB module required)
- Individual number of each module (Dev ID)
- Compatibility with earlier PRO system generations
Connecting two door entry panels in one system, i.e. master and slave (to switch the camera signal it is necessary to use the PRO-VIDEO-SW2-60
(G3) camera switch module)
IMPORTANT!
When disinfecting panels made of stainless steel, use cleaning agents based on alcohol only.
Any chlorides (which are present in common cleaning products) are harmful to the steel surface, causing abrasion of its natural protective coating and
increasing the risk of corrosio.
ACO Sp. z o.o. sp. komandytowa, 62-002 Suchy Las, ul. Diamentowa 7, phone/fax 61 843 93 71
www.wsparcie.aco.com.pl