12
* Among 4 holes, use 1
st
and 3
rd
holes
(smaller holes) from the top.
(
)
6-2 Connection of the system
（
installation
）
<Installation to the stand>
Main body of the Proximity Exhaust Noise Measurement System shall be installed to the stand using
2 ea of fixing brackets.
①
Put the main body of the Proximity Exhaust Noise Measurement System (wireless) on the table of
the stand.
Fixing screws (4 places) for fixing
bracket
* Top view
②
Hook the fixing brackets (2 ea) to the side panel as shown in the figure below and fix them using
washers.
③
Install two hooks using the upper holes as reference by M4 X 15 (2 ea, with spring washer and
washer).
Fixing brackets
Fixing bracket
Fixing bracket
Hook
Hook
Front view