4.1.3
Power On After Power Failure Option
This option defines the behavior of system when DC power is supplied.
Value
Description
S0 – Power On
System is powered on when DC power is supplied.
S5 – Power Off
System is kept in off state when DC power is supplied.
To set “Power On after Power Failure” option:
1.
When system boots up, press F2 to enter BIOS setup utility.
2.
Go to
[Power] > [Power On after Power Failure]
.
3.
Scroll down to highlight
[Power On after Power Failure]
, press Enter to bring up
setting options, S0 – Power On or S5 – Power Off, and press Enter to select the
setting.
4.
Press F10 to “Exit Saving Changes”.
62
Содержание FES7501
Страница 11: ...1 2 Dimension NOTE All measurements are in millimeters mm 1 2 1 Top View 1 2 2 Front View 11...
Страница 12: ...1 2 3 Back View 1 2 4 Side View 12...
Страница 39: ...8 With the four motherboard standoffs aligned gently lower the motherboard onto the heatsink 39...
Страница 48: ...48...
